Так же Вы можете заказать данную позицию по тел.: +7 (812) 200-96-95
Performance
Measuring length:
0 m ... 354 m
Measurement range:
354 m
Resolution:
0.1 mm
Piston speed:
6.6 m/s 1)
Measurement accuracy:
± 1000 + ME (Tu-25° C) Tk µm 2)
Repeatability (Ta not constant):
0.3 mm
footnote
1) If the max. movement speed is exceeded or the read head cannot detect a measuring element the error message FF FF FE Hex is produced. 2) If the read head and measuring element are mounted within ± 1 mm of the nominal mounting distance in the N and Y directions. The figures quoted related to the accuracy within a measuring element with reference to the start of that measuring element. ME = length measuring element Tu = Ambient temperature °C
Механические параметры
Connection type:
Cable, 10 m
Mass:
3.6 kg
Position tolerance:
± 10 mm
Material:
AlMgSiPbF28
Электрические параметры
Initialization time:
2 s
Position forming time:
0.8 ms
Supply voltage:
10 V ... 32 V
Power consumption:
250 mA
MTTFd: mean time to dangerous failure:
31 a (EN ISO 13849) 1)
footnote
1) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40°C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.
Interfaces
Electrical interface:
SSI
Interface signals:
Digital, serial
Interface for parametrization:
Data format: 1 start bit, 8 data bits, 1 stop bit, no parity, Data protocol: ASCII, Baud rate 9600 RS-422, RS-422, Four wire transmission, asynchrony, full duplex