Так же Вы можете заказать данную позицию по тел.: +7 (812) 200-96-95
Performance
Measurement range:
0 m ... 2 m
Linearity:
? ± 0.7 mm
Piston speed:
3.5 m/s
Repeat accuracy typ:
3 measuring steps
Механические параметры
Mass:
1.5 kg
Measuring wire diameter:
0.6 mm
Measuring wire material:
Highly flexible stranded steel (PA 12 sheathed)
Housing material:
Aluminum
Spring return force:
5 N ... 6 N 1)
Life of wire draw mechanism:
800,000 cycles 2) 3)
Wire acceleration:
? 20 m/s?
footnote
1) These values were measred at an ambient temperature of 25 °C. There may be variations at other temperatures. 2) 3) At high operating speeds over great lengths, this figure can decrease; at slow oerating speends over short lengths, it can increase.
Электрические параметры
Initialization time:
200 ms 1)
Position forming time:
0.1 ms
Supply voltage:
12 V ... 30 V
Code type:
24 bit/Gray
Code sequence:
Rising at wire pull-out
MTTFd: mean time to dangerous failure:
150 a (EN ISO 13849) 2)
footnote
1) Valid positional data can be read once this time has elapsed. 2) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40°C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.
Interfaces
Electrical interface:
SSI
Connection type:
Connector M23, 12-pin, radial
Clock frequency:
1 MHz 1)
Interface signals:
Clock +, Clock -, Data +, Data-
Encoder:
Absolute encoders
footnote
1)
Ambient data
EMC:
(according to EN 61000-6-2 and EN 61000-6-3)
Enclosure rating encoder:
IP 52 (according to IEC 60529), Note required mounting position
Resistance to shocks:
20 g, 6 ms (according to EN 60068-2-27)
Resistance to vibration:
10 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
