Так же Вы можете заказать данную позицию по тел.: +7 (812) 200-96-95
Performance
Measurement range:
0 m ... 2 m
Length of period:
1.195 mm
Linearity:
? ± 0.7 mm
Non-linearity:
± 0.1 mm
Piston speed:
3.5 m/s
Repeat accuracy typ:
? 0.15 °
Механические параметры
Mass:
1.5 kg
Measuring wire diameter:
0.6 mm
Measuring wire material:
Highly flexible stranded steel (PA 12 sheathed)
Housing material:
Aluminum
Spring return force:
5 N ... 6 N 1)
Life of wire draw mechanism:
800,000 cycles 2) 3)
Wire acceleration:
? 20 m/s?
footnote
1) These values were measred at an ambient temperature of 25 °C. There may be variations at other temperatures. 2) 3) At high operating speeds over great lengths, this figure can decrease; at slow oerating speends over short lengths, it can increase.
Электрические параметры
Operating current:
60 mA (without load)
Output frequency for sine/cosine signals:
0 kHz ... 65 kHz
Available memory area:
1,792 Byte
Supply voltage:
7 V ... 12 V
Code type:
Binary
Code sequence:
Rising at wire pull-out
MTTFd: mean time to dangerous failure:
250 a (EN ISO 13849) 1)
EEprom:
2048 Eeprom
footnote
1) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40°C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.
Interfaces
Electrical interface:
7 V ... 12 V, HIPERFACE®
Connection type:
Male connector M12, 8-pin, radial
Interface signals:
Parameter channel RS-485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
Number of sine/cosine periods per revolution:
128
Encoder:
Absolute encoders
Ambient data
EMC:
(according to EN 61000-6-2 and EN 61000-6-3)
Enclosure rating encoder:
IP 52 (according to IEC 60529), Note required mounting position
Resistance to shocks:
20 g, 6 ms (according to EN 60068-2-27)
Resistance to vibration:
10 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
