EcoLine - BCG08-C1HM0336 - 1061026
Сделать заказ
Так же Вы можете заказать данную позицию по тел.: +7 (812) 200-96-95
Performance
Measurement range: | 0 m ... 3 m |
---|---|
Repeatability: | ? 0.2 mm 1) |
Linearity: | ? ± 2 mm 2) |
Hysteresis: | ? 0.4 mm 3) |
Resolution (wire draw + encoder): | 0.03 mm 4) 5) |
footnote | 1) 2) 3) Value refers to wire draw mechanism 4) 5) |
Механические параметры
Mass (including encoder): | 840 g |
---|---|
Mass (mechanics): | 250 g |
Measuring wire diameter: | 0.55 mm |
Measuring wire material: | Highly flexible stranded steel 1.4401 stainless steel V4A |
Housing material, wire draw mechanism: | Plastic, Noryl |
Spring return force: | Ca. 5 N ... ca. 6.3 N 1) |
Life of wire draw mechanism: | 1 million cycles 2) |
Actual length of cable extension: | 3.2 m |
Wire acceleration: | 10 m/s? |
Operating speed: | 4 m/s |
Mounted encoder: | ATM60 CANopen |
Mounted mechanic: | MRA-G080-103D3 |
Part number mechanic: | 5322778 |
Part number encoder: | 1030025 |
Mass (measuring wire): | 1.2 g/m |
Length of wire pulled out per revolution: | 230 mm |
Number of steps per revolution: | 8,192 |
footnote | 1) These values were measred at an ambient temperature of 25 °C. There may be variations at other temperatures. 2) |
Электрические параметры
Initialization time: | Ca. 12 s 1) |
---|---|
Supply voltage: | 10 V ... 32 V |
Power consumption: | 2 W |
MTTFd: mean time to dangerous failure: | 150 a 2) 3) |
footnote | 1) Valid positional data can be read once this time has elapsed. 2) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40°C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532. 3) The value applies to the mounted encoder |
Interfaces
Electrical interface: | CANopen |
---|---|
Connection type: | Bus adaptor with cable screw fixings or connector 1) |
Address setting: | 0 ... 63 |
Protocol: | Communication Profile DS 301 V4.0 |
Bus termination: | Via DIP switches |
SET (electronic adjustment): | Via PRESET push button or protocol |
Encoder profile: | Device Profile DSP 406 V 2.0 |
Encoder: | Absolute encoders |
footnote | 1) Please order the bus adaptor seperately |
Ambient data
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) |
---|---|
Enclosure rating encoder: | IP 67 |
Enclosure rating mechanic: | IP 50 |
Resistance to shocks: | 100 g, 6 ms (according to EN 60068-2-27) |
Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) |
Relative humidity / Condensation: | 98 % (condensation of the optical scanning not permitted) |
Working temperature range (encoder): | -20 °C ... +70 °C |
Working temperature range (mechanics): | -30 °C ... +70 °C |
Working temperature range (combination): | Wird definiert durch den hoheren mininalen und niedrigeren maximalen Wert des Arbeitstemperaturbereichs von Encoder und Mechanik |