1) These values were measred at an ambient temperature of 25 °C. There may be variations at other temperatures. 2) 3)
Электрические параметры
Initialization time:
Ca. 12 s 1)
Supply voltage:
10 V ... 30 V
Power consumption:
3 W
MTTFd: mean time to dangerous failure:
80 a 2) 3)
footnote
1) Valid positional data can be read once this time has elapsed. 2) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40°C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532. 3) The value applies to the mounted encoder
Interfaces
Electrical interface:
EtherNet/IP
Connection type:
Connector 3 x M12, 4-pin, axial
Address setting:
Via DHCP / DEC-switches
Protocol:
EtherNet/IP IEC 61784-1
SET (electronic adjustment):
Via PRESET push button or protocol
Encoder profile:
0 x 22
Encoder:
Absolute encoders
Ambient data
EMC:
(according to EN 61000-6-2 and EN 61000-6-3)
Enclosure rating encoder:
IP 67
Enclosure rating mechanic:
IP 64
Resistance to shocks:
100 g, 6 ms (according to EN 60068-2-27)
Resistance to vibration:
30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
Relative humidity / Condensation:
90 % (condensation of the optical scanning not permitted)
Working temperature range (encoder):
-30 °C ... +70 °C
Working temperature range (mechanics):
-30 °C ... +70 °C
Working temperature range (combination):
Wird definiert durch den hoheren mininalen und niedrigeren maximalen Wert des Arbeitstemperaturbereichs von Encoder und Mechanik