1) These values were measred at an ambient temperature of 25 °C. There may be variations at other temperatures. 2) 3) 4)
Электрические параметры
Maximum output frequency:
600 kHz
Reference signal, position:
Electronically, gated with A and B
Reference signal, number:
1, electronically, gated with A and B
Maximum load current:
30 mA
Initialization time:
? 32 ms, with mechanical zero pulse width? 30 ms 1) 2)
Supply voltage:
4.5 V ... 32 V
Power consumption:
0.7 W
MTTFd: mean time to dangerous failure:
300 a 3) 4)
footnote
1) 2) Valid positional data can be read once this time has elapsed. 3) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40°C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532. 4) The value applies to the mounted encoder
Interfaces
Electrical interface:
4.5 V ... 5.5 V, TTL/RS422
Connection type:
Connector M23, 12-pin, radial
Encoder:
Incremental encoders
Ambient data
EMC:
(according to EN 61000-6-2 and EN 61000-6-3)
Enclosure rating encoder:
IP 67
Enclosure rating mechanic:
IP 64
Resistance to shocks:
60 g, 6 ms (according to EN 60068-2-27)
Resistance to vibration:
20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
Relative humidity / Condensation:
90 % (condensation of the optical scanning not permitted)
Working temperature range (encoder):
-30 °C ... +70 °C
Working temperature range (mechanics):
-30 °C ... +70 °C
Working temperature range (combination):
Wird definiert durch den hoheren mininalen und niedrigeren maximalen Wert des Arbeitstemperaturbereichs von Encoder und Mechanik