S3000 Remote, Sensor head with I/O module - S30A-4011EA - 1028938
Сделать заказ
Так же Вы можете заказать данную позицию по тел.: +7 (812) 200-96-95
Функции
| Number of simultaneously monitored protective fields: | ? 4 1) |
|---|---|
| Expanded measured data output (CMS): | - |
| footnote | 1) If more than one protective field is monitored simultaneously, then the safe output signals must be routed to safe outputs of a Flexi Soft safety controller, or via a safe EFI gateway. |
Технические характеристики
| Laser class: | 1 (21 CFR 1040.10 and 1040.11, DIN EN 60825:2001) |
|---|---|
| Enclosure rating: | IP 65 (EN 60529) |
| Protection class: | II (EN 50178) |
| Type: | Type 3 (IEC 61496) |
| Safety integrity level: | SIL2 (IEC 61508), SILCL2 (EN 62061) |
| Category: | Category 3 (EN ISO 13849) |
| Performance level: | PL d (EN ISO 13849) |
| PFHd: | 8.0 * 1E-08 (EN ISO 13849) |
| TM (mission time): | 20 a (EN ISO 13849) |
| Ambient operating temperature: | -10 °C ... +50 °C |
| Dimensions (W x H x D): | 155 mm x 185 mm x 160 mm |
| Weight: | 3.3 kg |
| Scan angle: | 190 ° |
| Protective field range: | 4 m |
| Maximum warning field range: | 49 m |
| Number of field sets: | 32 1) 2) |
| Type of field set: | Dual field sets, Triple field sets |
| Number of monitoring cases: | 32 3) |
| Response time: | 60 ms 4) |
| Resolution: | 30 mm, 40 mm, 50 mm, 70 mm, 150 mm, configurable |
| Distance measuring range: | 49 m |
| Number of multiple samplings: | Configurable 2 ... 16 |
| Electrical connection: | System plug with or without connecting cable |
| Supply voltage: | 16.8 V DC, 24 V DC, 28.8 V DC |
| Number of EDM inputs: | 1 |
| Number of reset-/restart inputs: | 1 |
| Number of static control inputs with EFI: | 5 5) |
| Number of safe outputs: | 2, Safety outputs (OSSD) |
| Number of application diagnostic outputs: | 3 6) |
| Maximum output current: | 500 mA |
| Configuration and diagnostics interface: | RS-232 |
| Data interface: | RS-422 |
| footnote | 1) In dual field mode 32, in triple field mode 21 field sets 2) 3) The performance characteristics of the Remote device correspond to those of the host. If the system exclusively consists of Remote devices connected to an EFI partner, 16 dual field sets or 10 triple field sets and 32 monitoring cases are available. For monitoring case switching static or dynamic inputs of the EFI partner have to be used. 4) Depending on basic response time and multiple sampling 5) Can only be used in EFI system network, e.g., with a Flexi Soft safety controller or another S300 or S3000 safety laser scanner 6) Freely programmable, e.g., warning field, contamination, reset required |
