Так же Вы можете заказать данную позицию по тел.: +7 (812) 200-96-95
Features
Brief description:
Fieldbus proxy/gateway for connecting one identification sensor to PROFINET-IO networks (interface 2 x RJ45 AIDA, female connector/female connector, 4-pin)
2-port Ethernet in accordance with IEEE 802.3 (baud rate 100 MBit/s, full-duplex transmission, 2-port switch, auto-negotiation, auto-crossover). Maximum data length is limited by the mode of communication (fragmentation protocol) to 4,000 bytes.
Protocol (Ethernet):
PROFINET
CAN bus:
-
PROFIBUS DP:
-
DeviceNet:
-
Switching inputs:
1
Optical indicators:
8 LEDs
Configuration software:
SOPAS ET
Mechanics/electronics
Electrical connection:
1 x “DEVICE” connection, 15-pin D-sub HD female connector with seal, 1 x “EXT. IN 1” connection, 5-pin M12 female connector, A-coded, 1 x “P1 PROFINET” connection, 8-pin RJ45 female connector, push-pull AIDA compliant, 1 x “P2 PROFINET” connection, 8-pin RJ45 female connector, push-pull AIDA compliant, 1 x “USB” connection, 5-pin micro-B socket, for configuration/diagnostics, behind screw-mounted cover, 2 x “POWER” connection, 5-pin power male connector, push-pull AIDA compliant
Operating voltage:
10 V DC ... 30 V DC
Power consumption:
< 5 W, if no sensor is connected and digital switching input is not connected
Housing:
Aluminum (unpainted)
Enclosure rating:
IP 65 (EN 60068-2-17 (1995-05))
Protection class:
III (EN 60950-1 (2011-01))
Weight:
690 g
Dimensions:
47.4 mm x 270.1 mm x 74.7 mm
Housing color:
Aluminum (unpainted)
Scanner connection:
RS-232
Ambient data
Electromagnetic compatibility (EMC):
EN 61000-6-3 (2007-01) + A1 (2011) / EN 61000-6-2 (2005-08)
