Flexi Loop safe sensor cascade, OSSD 5-pin - FLN-OSSD1000105 - 1061709
Сделать заказ
Так же Вы можете заказать данную позицию по тел.: +7 (812) 200-96-95
Safety-related parameters
| Safety integrity level: | SIL3 (IEC 61508) SILCL3 (EN 62061) |
|---|---|
| Category: | Category 4 (EN ISO 13849-1) |
| Performance level: | PL e (EN ISO 13849-1) |
| PFHd: | 0.76 * 1E-09 (EN ISO 13849) |
| TM (mission time): | 20 a (EN ISO 13849) |
| Safe state in the event of a fault: | The sensor cascade has no internal fault detection and is unable to assume a safe state in the event of a fault. Fault detection is performed by the connected safety-related logic unit. |
Функции
| Cross-circuit: | Monitoring via OSSD device |
|---|---|
| Short-circuit: | Monitoring via OSSD device |
| Discrepancy errors: | Monitoring via Flexi Loop node |
| Sequence errors: | Monitoring via Flexi Loop node |
Механические параметры
| Dimensions (W x H x D): | 68.15 mm x 45 mm x 18 mm |
|---|---|
| Weight: | 28 g (± 5 %) |
Электрические параметры
| Protection class: | III (EN 61140) |
|---|---|
| Type of supply voltage: | SELV |
| Supply voltage Vs: | 24 V DC (16.8 V DC ... 30 V DC) |
| Power consumption: | 45 mA |
Interfaces
| Safety device connection: | Safety sensor with dual-channel OSSD outputs |
|---|---|
| Flexi Loop input: | To connect a Flexi Loop predecessor module, or to connect a Flexi Loop string with the safety controller Flexi Soft. |
| Flexi Loop output: | To connect a Flexi Loop successor module, or to terminate a Flexi Loop string with the Flexi Loop termination element. |
| Connection type safety device: | Female connector M12, 5-pin |
| Connection type Flexi Loop input: | Male connector M12, 5-pin |
| Connection type Flexi Loop output: | Female connector M12, 5-pin |
| Number of non-safe inputs: | 1 |
| IO-Link: | - |
Ambient data
| Enclosure rating: | IP 65, IP 67 (EN 60529) |
|---|---|
| Ambient operating temperature: | -25 °C ... +55 °C |
| Storage temperature: | -25 °C ... +70 °C |
| Electromagnetic compatibility (EMC): | Class A (EN 61000-6-2, EN 55011) |
| Shock resistance (continuous shock): | 10 g, 16 ms (EN 60068-2-64) |
| Shock resistance (single shock): | 30 g, 11 ms (EN 60068-2-27) |
