Так же Вы можете заказать данную позицию по тел.: +7 (812) 200-96-95
Поставка
Подключение
Backplane bus
Номинальное напряжение
12 V DC , only in connection with the power supplies FB92**
Потеря мощности
0.5 W
Потребляемая мощность
1 W
Внутренняя шина
Подключение
Backplane bus
Интерфейс
Manufacturer-specific bus to standard com unit
Выход
Количество каналов
1
Подходящие устройства поля
Proportional valves, I/P converter, local indicators
Подключение
Channel I: 2/3+, 4/5-
Ток
0 ... 25 mA short-circuit protected
Нагрузка
750 ? max.
Строка обнаружения неисправности
Can be switched on/off for each channel via configuration tool , configurable via configuration tool
Короткое замыкание
Ex works settings: < 50 ? configurable between 0 ... 26 mA
Разомкнутая цепь
Deviation of preset output value > 0.5 mA
Самоконтроль
Within 0.5 s the device goes in safe state, e.g. after loss of communication
Характеристики переноса
Отклонение: После калибровки
0.1 % of the signal range at 20 °C (68 °F)
Время обновления
100 ms
Индикаторы/настройки
Светодиодный индикатор
Power LED (P) green: supply Diagnostic LED (I) red: module fault , red flashing: communication error , white: fixed parameter set (parameters from com unit are ignored) , white flashing: requests parameters from com unit Status LED (1) red: line fault (lead breakage or short circuit)