Поставляем Цилиндрический датчик с резьбой М18 Cylindrical threaded housing, IM18 NAMUR - IM18-08N-N-ZW0 - 6021127 для промышленных и гражданских объектов. Оригинальная продукция с гарантией. Подбор аналога, доставка по Москве, СПб и регионам РФ.
| Design: | Cylindrical |
|---|---|
| Thread size: | M18 x 1 |
| Sensing range Sn: | 8 mm |
| Assured sensing range Sa: | 6.48 mm |
| Installation type: | Non-flush |
| Switching frequency: | 300 Hz |
| Output type: | NAMUR |
| Output function: | NC |
| Enclosure rating: | IP 67 1) |
| Electrical connection: | Cable, 2-wire, 2 m |
| footnote | 1) According to EN 60529 |
| Supply voltage: | 7.5 V DC ... 25 V DC 1) |
|---|---|
| Power consumption: | ? 30 mA 2) |
| Current consumption, sensor is activated: | ? 1 mA |
| Current consumption, sensor is not activated: | ? 2.2 mA |
| Hysteresis: | 1 % ... 15 % |
| Temperature drift (of Sr): | ± 10 % |
| EMC: | According to EN 60947-5-6 |
| Cable material: | PVC |
| Conductor cross-section: | 0.5 mm? |
| Cable diameter: | 5.4 mm |
| Shock and vibration resistance: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm |
| Ambient temperature operation: | -20 °C ... +70 °C |
| Housing cap material: | Plastic, PBT |
| Housing length: | 33 mm |
| Thread length: | 24 mm |
| Tightening torque, max.: | 35 Nm |
| Items supplied: | Fastening nuts (2 x); 24 mm hex, metal |
| EC Approval Certificate: | PTB 03 ATEX 2037 |
| Hazardous area category: | 1G, 2G |
| Input voltage Ui max.: | 15 V 3) |
| Input power Pi max.: | 120 mW 4) |
| Input current Ii max.: | 50 mA 5) |
| Internal capacitance Ci max.: | 155 nF 6) |
| Internal inductance Li max.: | 50 µH 7) |
| Nominal voltage: | 8.2 V DC |
| ATEX marking: | II 1 G Ex ia IIB T6 Ta: -20 °C ... +70 °C, II 2 G Ex ia IIC T6 Ta: -20 °C ... +70 °C |
| Cable resistance: | 50 ? |
| Housing material: | Metal, Nickel-plated brass |
| Weight: | 164 g |
| footnote | 1) 2) When used outside the hazardous area 3) 4) 5) 6) 7) For connection only to a separately certified, intrinsically safe electrical circuit |
| Note: | The values are reference values which may vary |
|---|---|
| Stainless steel (V2A, 304): | Ca. 0.7 |
| Copper (Cu): | Ca. 0.3 |
| Aluminum (Al): | Ca. 0.4 |
| Brass (Br): | Ca. 0.5 |
| A: | 18 mm |
|---|---|
| B: | 36 mm |
| C: | 18 mm |
| D: | 24 mm |
| E: | 16 mm |
| F: | 64 mm |
| Remark: | Associated graphic see 'Installation' |