| Ripple 1): | < 5 Vpp |
|---|
| Power consumption 2): | < 120 mA |
|---|
| Switching frequency 3): | Adjustable, 1 kHz, 0.5 kHz, 3.5 kHz |
|---|
| Response time 4): | 1,000 µs 500 µs 145 µs |
|---|
| Output type: | PNP: HIGH = VS- ? 2 V / LOW approx. 0 V |
|---|
| Switching mode: | PNP |
|---|
| Output (channel): | 4 colors |
|---|
| Output current Imax. 5): | < 100 mA |
|---|
| Input, teach-in (ET): | PNP:, Run: U < 2 V, Teach: U = 10 V ... < UV |
|---|
| Input, blanking input (AT) 6): | Blanked: U > 10 V ... < Uv, Free-running: U < 2 V, PNP: |
|---|
| Retention time (ET): | 25 ms, non-volatile memory |
|---|
| Time delay: | Deactivation delay 20 ms, shiftable |
|---|
| Connection type: | Male connector M12, 8-pin |
|---|
| Protection class 7): | II |
|---|
| Circuit protection: | VS connections reverse-polarity protected Output Q short-circuit protected Interference suppression |
|---|
| Enclosure rating: | IP 67 |
|---|
| Weight: | 400 g |
|---|
| Housing material: | Metal, Zinc diecast |
|---|
| Supply voltage: | 10 V DC ... 30 V DC 8) |
|---|
| Fieldbus interface: | - |
|---|
| footnote | 1) May not exceed or fall short of VS tolerances 2) Without load 3) With light/dark ratio 1:1 4) Signal transit time with resistive load 5) Consumption count Q1 / Q2 6) AT > 200 µs 7) Reference voltage DC 32 V 8) Limit values; operation in short-circuit protected network max. 8 A |
|---|