Поставляем Световая сетка PLG6 PLG, PLG6 - PLG6-060F434 - 1051978 для промышленных и гражданских объектов. Оригинальная продукция с гарантией. Подбор аналога, доставка по Москве, СПб и регионам РФ.
| Technology: | Retro-reflective light grid |
|---|---|
| Task: | Switching light grid |
| Minimum detectable object (MDO): | Parallel beam, 70 mm |
| Beam separation: | 60 mm |
| Количество лучей: | 2 |
| Detection height: | 60 mm |
| Minimum range: | ?60 mm |
|---|---|
| Response time 1): | Parallel beam: ?5 ms |
| Working range (reflective tape REF-PLG): | 0.35 m |
| footnote | 1) With resistive load |
| Output type: | 1 x PNP (Q) |
|---|---|
| Connection type: | Short cable (0.28 m) with connector M12, 4-pin |
| Input current: | 30 mA |
| Job LED input: | PNP |
| Wave length: | 660 nm |
|---|---|
| Supply voltage Vs 1): | DC 15 V ... 30 V |
| Power consumption sender: | 50 mA |
| Power consumption receiver: | < 50 mA |
| Current consumption job LED 2): | 30 mA |
| Ripple: | < 5 Vpp |
| Output current Imax.: | 50 mA |
| Initialization time: | < 1 s |
| Dimensions (W x H x D): | 35.6 mm x 130 mm x 32 mm |
| Housing material: | Aluminum |
| Indication: | LED |
| Enclosure rating: | IP 40 |
| Circuit protection: | Output Q short-circuit protected Interference suppression VS connections reverse-polarity protected |
| Weight: | < 500 g |
| Front screen: | PMMA |
| Output mode 3): | Q dark switching |
| footnote | 1) 2) Typical value 3) Q = active in case one beam is interrupted, /Q = active in case all beam are free |
| Protection class: | III |
|---|---|
| EMC: | EN 60947-5-2 |
| Ambient temperature: | Operation: -10 ... +55 °C Storage: -25 ... +70 °C |
| Vibration resistance: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) |
| Shock load: | 10 g / DIN EN 60068-2-29 / 16 ms |