Cylindrical threaded housing, IM30 NAMUR - IM30-15N-N-ZW0 - 6021129
Артикул: sick155448
Наличие: Под заказ
Сделать заказ
Так же Вы можете заказать данную позицию по тел.: +7 (812) 200-96-95
Features
| Design: | Cylindrical |
|---|
| Thread size: | M30 x 1.5 |
|---|
| Sensing range Sn: | 15 mm |
|---|
| Assured sensing range Sa: | 12.15 mm |
|---|
| Installation type: | Non-flush |
|---|
| Switching frequency: | 200 Hz |
|---|
| Output type: | NAMUR |
|---|
| Output function: | NC |
|---|
| Enclosure rating: | IP 67 1) |
|---|
| Electrical connection: | Cable, 2-wire, 2 m |
|---|
| footnote | 1) According to EN 60529 |
|---|
Mechanics/electronics
| Supply voltage: | 7.5 V DC ... 25 V DC 1) |
|---|
| Power consumption: | ? 30 mA 2) |
|---|
| Current consumption, sensor is activated: | ? 1 mA |
|---|
| Current consumption, sensor is not activated: | ? 2.2 mA |
|---|
| Hysteresis: | 1 % ... 15 % |
|---|
| Temperature drift (of Sr): | ± 10 % |
|---|
| EMC: | According to EN 60947-5-6 |
|---|
| Cable material: | PVC |
|---|
| Conductor cross-section: | 0.5 mm? |
|---|
| Cable diameter: | 5.4 mm |
|---|
| Shock and vibration resistance: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm |
|---|
| Ambient temperature operation: | -20 °C ... +70 °C |
|---|
| Housing cap material: | Plastic, PBT |
|---|
| Housing length: | 41 mm |
|---|
| Thread length: | 25 mm |
|---|
| Tightening torque, max.: | 50 Nm |
|---|
| Items supplied: | Fastening nuts (2 x); 36 mm hex, metal |
|---|
| EC Approval Certificate: | PTB 03 ATEX 2037 |
|---|
| Hazardous area category: | 1G, 2G |
|---|
| Input voltage Ui max.: | 15 V 3) |
|---|
| Input power Pi max.: | 120 mW 4) |
|---|
| Input current Ii max.: | 50 mA 5) |
|---|
| Internal capacitance Ci max.: | 145 nF 6) |
|---|
| Internal inductance Li max.: | 110 µH 7) |
|---|
| Nominal voltage: | 8.2 V DC |
|---|
| ATEX marking: | II 1 G Ex ia IIB T6 Ta: -20 °C ... +70 °C, II 2 G Ex ia IIC T6 Ta: -20 °C ... +70 °C |
|---|
| Cable resistance: | 50 ? |
|---|
| Housing material: | Metal, Nickel-plated brass |
|---|
| Weight: | 220 g |
|---|
| footnote | 1) 2) When used outside the hazardous area 3) 4) 5) 6) 7) For connection only to a separately certified, intrinsically safe electrical circuit |
|---|
Reduction factors
| Note: | The values are reference values which may vary |
|---|
| Stainless steel (V2A, 304): | Ca. 0.7 |
|---|
| Copper (Cu): | Ca. 0.3 |
|---|
| Aluminum (Al): | Ca. 0.4 |
|---|
| Brass (Br): | Ca. 0.5 |
|---|
Installation note
| A: | 30 mm |
|---|
| B: | 60 mm |
|---|
| C: | 30 mm |
|---|
| D: | 45 mm |
|---|
| E: | 30 mm |
|---|
| F: | 120 mm |
|---|
| Remark: | Associated graphic see 'Installation' |
|---|
