Inductive MultiTask sensors, SAM M18 - IMC18-07BPDZC0SA05 - 1061987
Артикул: sick150790
Наличие: Под заказ
Сделать заказ
Так же Вы можете заказать данную позицию по тел.: +7 (812) 200-96-95
Features
| Design: | Cylindrical |
|---|
| Thread size: | M18 x 1 |
|---|
| Sensing range Sn: | 7 mm |
|---|
| Assured sensing range Sa: | 5.6 mm |
|---|
| Installation type: | Flush |
|---|
| Output type: | PNP |
|---|
| Output function: | NO |
|---|
| Electrical wiring: | DC 4-wire |
|---|
| Enclosure rating: | IP 67 1) |
|---|
| Connection type: | Connector M12, 4-pin |
|---|
| Output Q Imp: | Pulse output (The pulse sequence corresponds to the damping frequency) |
|---|
| Output Q: | Output type (dependant on the adjusted threshold) |
|---|
| Speed range, adjustable via two thresholds: | 6...12,000 impulses / min 2) |
|---|
| Acceleration range, adjustable: | 0.1...2 impulses / sec? 3) |
|---|
| Time delay, adjustable: | Mode 0: No start-up delay Mode 1: 0...254 sec., adjustable Mode 2: When reaching the upper threshold |
|---|
| footnote | 1) According to EN 60529 2) Up to a max. pulse sequence of 12,000 pulses / min 3) Up to a max. pulse sequence of 1.200 pulses / min |
|---|
Mechanics/electronics
| Supply voltage: | 10 V DC ... 30 V DC |
|---|
| Ripple: | ? 10 % |
|---|
| Voltage drop: | ? 2.5 V 1) |
|---|
| Power consumption: | ? 35 mA 2) |
|---|
| Hysteresis: | 5 % ... 15 % 3) |
|---|
| Repeatability: | ? 2 % 4) 5) |
|---|
| Temperature drift (of Sr): | ± 10 % |
|---|
| EMC: | According to EN 60947-5-2 |
|---|
| Output current Ia: | ? 100 mA |
|---|
| Shock and vibration resistance: | 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm |
|---|
| Ambient temperature operation: | -25 °C ... +75 °C |
|---|
| Housing material: | Metal, Nickel-plated brass |
|---|
| Housing cap material: | Plastic, PA6 |
|---|
| Housing length: | 69 mm |
|---|
| Thread length: | 52 mm |
|---|
| Tightening torque, max.: | ? 40 Nm |
|---|
| Status indicator QImp: | LED, yellow |
|---|
| Status indicator Q: | LED, blau |
|---|
| Minimum response time: | Mode acceleration monitoring 1 sec, Mode speed monitoring 50 ms |
|---|
| Factory setting: | Operating mode: acceleration monitoring, Threshold acceleration: 1 pulse/sec?, Start-up delay mode: time delay, Upper/lower threshold speed: 200/300 pulses/min, Time delay: 5 sec |
|---|
| Fieldbus integration: | IO-Link V1.0 |
|---|
| Mode: | COM 2 (38k4) |
|---|
| Cycle time: | 5 ms |
|---|
| Process data length: | 16 Bit |
|---|
| Process data structure: | 1 bit pulse output, 1 bit switching output, 14 bit measured value |
|---|
| footnote | 1) At Ia max 2) Without load 3) Of Sn 4) Ub and Ta constant 5) Of Sr |
|---|
Reduction factors
| Note: | The values are reference values which may vary |
|---|
| Carbon steel St37 (Fe): | 1 |
|---|
| Stainless steel (V2A, 304): | 0.8 |
|---|
| Copper (Cu): | 0.4 |
|---|
| Aluminum (Al): | 0.45 |
|---|
| Brass (Br): | 0.4 |
|---|
Installation note
| B: | 18 mm |
|---|
| C: | 18 mm |
|---|
| D: | 18 mm |
|---|
| F: | 56 mm |
|---|
| Remark: | Associated graphic see 'Installation' |
|---|
