DMP2 - DMP2-N11111 - 1016236
Артикул: sick142400
Наличие: Под заказ
Сделать заказ
Так же Вы можете заказать данную позицию по тел.: +7 (812) 200-96-95
Performance
| Target: | Reflector |
|---|
| Repeatability 1): | 0.15 mm |
|---|
| Sensing distance: | 200 mm ... 500 mm (PL22), 500 mm ... 1,200 mm (PL50A), 500 mm ... 2,000 mm (PL80A) |
|---|
| Response time: | 3 ms |
|---|
| Switching frequency: | 250 Hz |
|---|
| Light source: | LED, red |
|---|
| Sensing angle 2): | ± 10 ° |
|---|
| Operating mode: | Choice of continuous or triggered |
|---|
| footnote | 1) At 300 mm scanning distance 2) In all axis perpendicular to the reflector (PL22, PL50A, PL80A) |
|---|
Interfaces
| Blanking input AT: | Blanked (triggered): NPN: 0V ... Uv - (? 18 V) Free running: NPN: Uv- (? 2 V) or free running |
|---|
| Output type: | 2 x NPN 1) |
|---|
| Analog output: | 2 x 4 mA ... 20 mA (700 ?), 2 x QA 2) |
|---|
| footnote | 1) NPN: HIGH = ? 2 V / LOW = VS 2) Within detection area 4 mA ... 20 mA, outside detection area 3 mA |
|---|
Mechanics/electronics
| Supply voltage Vs: | DC 18 V ... 30 V 1) |
|---|
| Ripple 2): | < 5 Vpp |
|---|
| Connection type: | Male connector M12, 8-pin |
|---|
| Weight: | 990 g 3) |
|---|
| Current consumption: | < 250 mA 4) |
|---|
| Output current Ia: | ? 100 mA |
|---|
| footnote | 1) Limit values, reverse-polarity protected 2) May not fall short of or exceed VS tolerances 3) Incl. cable 4) Without load |
|---|
Ambient data
| Enclosure rating: | IP 67 |
|---|
| Protection class 1): | II |
|---|
| Ambient temperature: | Operation: -25 ... 55 °C, Storage: -25 ... 75 °C |
|---|
| Vibration resistance: | According to IEC 68 |
|---|
| footnote | 1) Reference voltage DC 50 V |
|---|
