DMT, DMT10-2 - DMT10-2-1113 - 1027605
Сделать заказ
Так же Вы можете заказать данную позицию по тел.: +7 (812) 200-96-95
Performance
| Measurement range 1): | 0.5 m ... 20 m |
|---|---|
| Resolution: | ? 1 mm |
| Repeatability 2) 3) 4) 5): | 10 mm, 7 mm |
| Accuracy 6) 7): | ± 10 mm |
| Light source: | Laser, infrared |
| Typ. light spot size (distance): | 20 mm (+ 5 x distance in m) |
| Average depth: | 1/16/64/256/1,024 |
| Aperture delay time: | 1 s 8) |
| Note: | Mechanical aperture |
| Response time 9): | 1 ms ... 4,000 ms |
| Cycle time: | 1,024 per sec. |
| Special characteristic: | Mechanical aperture |
| Laser class: | 1 (EN 60825-1:Nov.2001, IEC 60825-1:AM2:2001) |
| Output time: | 1 ms ... 4,000 ms |
| footnote | 1) Max. object temperature 1,400 °C 2) Dependant on distance and remission, 7 mm, at 6 % ... 90 % remission from 0.5 m ... 65 m, at 6 % ... 18 % remission from 0.5 m ... 40 m, at 6 % remission from 0.5 m ... 15 m 3) 5) Environmental conditions constant, min. warm-up time 30 min, average depth 1,024, statistical error 1 ? 4) Dependant on distance and remission, 10 mm, at 6 % ... 90 % remission from 60 m ... 155 m, at 6 % ... 18 % remission from 40 m ... 65 m, at 6 % remission from 15 m ... 40 m 6) 23 °C air temperature, 977 hPa, min. warm-up time 30 min. 7) When operating in ambient temperatures between +40 °C ... +55 °C the accuracy can decrease by factor 2.5 8) Dependant on average setting, average depth, timeout, baud rate, data outpu and output format 9) Dependant on average setting, average depth, timeout, baud rate, data output, output format and effective dead time of aperture Dependant on average setting, average depth, timeout, baud rate, data outpu and output format |
Interfaces
| Data interface 1): | RS-422 RS-232 |
|---|---|
| Output type 2): | Q1, Q2 |
| Interface for parametrization: | RS-232 |
| Analog output: | 4 mA ... 20 mA, scalable |
| footnote | 1) Switchable 2) Output Q short-circuit protected |
Mechanics/electronics
| Supply voltage Vs: | DC 18 V ... 30 V, limit values |
|---|---|
| Ripple 1): | < 5 Vpp |
| Initialization time: | 6 s |
| Weight: | Ca. 1,200 g |
| Output current Ia: | 100 mA |
| Power consumption 2): | ? 6 W |
| Connection type: | 1 x cable gland, 1 x Sub-D, 9-pin |
| footnote | 1) May not fall short of or exceed VS tolerances 2) Without load |
Ambient data
| Enclosure rating: | IP 65 |
|---|---|
| Protection class 1): | III |
| Temperature drift 2) 3): | Typ. 0.3 mm/K Typ. 0.6 mm/K |
| Ambient temperature: | Operation with cooling case: -10 ... +75 °C Operation: -10 ... +55 °C Storage: -25 ... +70 °C |
| Mechanical load: | Shock: IEC 60068-2-27, -2-29 Sine: IEC 60068-2-6 |
| Electromagnetic compatibility (EMC): | EN 55011:1998 Kl. B, Gr.1 / EN 61000-6-2 |
| footnote | 1) Reference voltage DC 50 V PELV-voltage (EN 50178) 2) -10° C ... 0° C, +40 °C … +55 °C 3) 0 °C ... +40 °C |
