KT5, KTL5-2 Fiber Optic - KTL5G-2P14 - 1022091
Сделать заказ
Так же Вы можете заказать данную позицию по тел.: +7 (812) 200-96-95
Features
| Sensing distance: | Dependent on the fiber-optic cablethe fiber-optic cable |
|---|---|
| Light source 1): | LED |
| Wave length: | 520 nm |
| Light spot size: | Dependent on the fiber-optic cable |
| Output function: | Light/dark switching |
| Type of light: | Visible green light |
| Dimensions (W x H x D): | 30.4 mm x 53 mm x 80 mm |
| Housing design (light emission): | Rectangular |
| Teach-in mode: | Without, automatic contrast detection |
| footnote | 1) Average service life of 100,000 h at TA = +25 °C |
Mechanics/electronics
| Ripple 1): | ? 5 Vpp |
|---|---|
| Current consumption 2): | < 80 mA |
| Switching frequency 3): | 10 kHz |
| Response time 4): | 50 µs |
| Output type: | PNP: HIGH = VS- ? 2 V / LOW approx. 0 V |
| Switching mode: | NPN |
| Input, fine/coarse (F/C): | Coarse: U > 10 V ... < Uv, PNP: fine: U = 0 V |
| Retention time (ET): | 25 ms, non-volatile memory |
| Connection type: | Connector M12, 5-pin |
| Protection class 5): | II |
| Circuit protection: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected |
| Enclosure rating: | IP 67 |
| Weight: | 400 g |
| Housing material: | Metal, Zinc diecast |
| Output current Imax.: | 100 mA |
| Supply voltage: | 10 V DC ... 30 V DC 6) |
| Fieldbus interface: | - |
| footnote | 1) May not exceed or fall short of VS tolerances 2) Without load 3) With light/dark ratio 1:1 4) Signal transit time with resistive load 5) Reference voltage DC 50 V 6) Limit values; operation in short-circuit protected network max. 8 A |
Ambient data
| Shock load: | According to IEC 60068 |
|---|---|
| UL File No.: | NRKH.E181493 NRKH7.E181493 |
| Ambient operating temperature: | -10 °C ... +55 °C |
| Ambient storage temperature: | -25 °C ... +75 °C |
