KTM Core, KTM Core - KTM-MB31112P - 1070053
Сделать заказ
Так же Вы можете заказать данную позицию по тел.: +7 (812) 200-96-95
Features
| Sensing distance: | 12.5 mm |
|---|---|
| Sensing distance tolerance: | ± 3 mm |
| Light source 1): | LED |
| Light spot size: | 2 mm x 2 mm |
| Light spot direction: | - |
| Output function: | Light/dark switching |
| Max. web speed tech-in (dynamic): | 1 m/s 2) |
| Type of light: | Visible white light |
| Dimensions (W x H x D): | 31.5 mm x 21 mm x 12 mm |
| Housing design (light emission): | Rectangular |
| Teach-in mode: | Potentiometer, screw driver |
| footnote | 1) Average service life: 100,000 h at TU = +25 °C 2) At a mark size of 4 mm |
Mechanics/electronics
| Residual ripple 1): | ? 5 Vpp |
|---|---|
| Power consumption 2): | < 50 mA |
| Switching frequency 3): | 10 kHz |
| Response time 4): | 50 µs |
| Jitter: | 25 µs |
| Output type: | PNP: HIGH = VS- ? 2 V / LOW approx. 0 V NPN: HIGH = approx. VS / LOW ? 2 V |
| Switching mode: | PNP NPN |
| Retention time (ET): | 28 ms, non-volatile memory |
| Electrical connection: | Cable with connector M12, 4-pin |
| Protection class: | III |
| Circuit protection: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected |
| Enclosure rating: | IP 67, IP 67 |
| Weight: | 70 g |
| Housing material: | ABS, Plastic |
| Output current Imax.: | 50 mA 5) |
| Supply voltage: | 12 V DC ... 24 V DC 6) |
| Fieldbus interface: | - |
| footnote | 1) May not exceed or fall below Uv tolerances 2) Without load 3) With light/dark ratio 1:1 4) Signal transit time with resistive load 5) At supply voltage > 24 V, Imax = 30 mA. Imax is consumption count of all Qn 6) Limit values: DC 12 V (-10 %) ... DC 24 V (+20 %). Operation in short-circuit protected network max. 8 A |
Ambient data
| Shock load: | According to IEC 60068 |
|---|---|
| UL File No.: | NRKH.E348498 |
| Ambient operating temperature: | -10 °C ... +55 °C |
| Ambient storage temperature: | -20 °C ... +75 °C |
