2-port Ethernet in accordance with IEEE 802.3 (baud rate 100 MBit/s, full-duplex transmission, 2-port switch, auto-negotiation, auto-crossover). Maximum data length is limited by the mode of communication (fragmentation protocol) to 4,000 bytes.
Protocol (Ethernet):
PROFINET
Remark (CAN bus):
Depending on sensor connected
PROFIBUS DP:
-
DeviceNet:
-
Switching inputs:
1
Optical indicators:
6 LEDs
Configuration software:
SOPAS ET
Mechanics/electronics
Electrical connection:
1 x “DEVICE” connection, 15-pin D-sub HD female connector with seal, 1 x “EXT. IN 1” connection, 5-pin M12 female connector, A-coded, 1 x “POWER” connection, 5-pin M12 plug, A-coded, 1 x “PROFINET P1” connection, 4-pin M12 socket, D-coded, 1 x “PROFINET P2” connection, 4-pin M12 socket, D-coded, 1 x “USB” connection, 5-pin micro-B socket, for configuration/diagnostics, behind screw-mounted cover
Operating voltage:
10 V DC ... 30 V DC
Power consumption:
< 5 W, if no sensor is connected and digital switching input is not connected
