Поставляем Датчик контраста KT6 KT6, KT6-2 - KT6W-2N5116 - 1046010 для промышленных и гражданских объектов. Оригинальная продукция с гарантией. Подбор аналога, доставка по Москве, СПб и регионам РФ.
| Sensing distance: | 10 mm |
|---|---|
| Sensing distance tolerance: | ± 3 mm |
| Light source 1): | LED |
| Wave length: | 470 nm, 525 nm, 640 nm |
| Light emission: | Short side of housing |
| Light spot size: | 1.5 mm x 6.5 mm |
| Light spot direction 2): | Vertical |
| Type of light: | Visible blue light, Visible green light, Visible red light |
| Dimensions (W x H x D): | 30.4 mm x 53 mm x 80 mm |
| Housing design (light emission): | Rectangular |
| Teach-in mode: | Static 2-point teach-in |
| footnote | 1) Average service life of 100,000 h at TA = +25 °C 2) In relation to long side of housing |
| Ripple 1): | ? 5 Vpp |
|---|---|
| Power consumption 2): | < 40 mA |
| Switching frequency 3): | 5 kHz |
| Response time: | 100 µs |
| Output type: | NPN: HIGH = approx. VS / LOW ? 2 V |
| Switching mode: | NPN |
| Retention time (ET): | 25 ms, non-volatile memory |
| Connection type: | Connector M12, 4-pin |
| Protection class 4): | II |
| Circuit protection: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected |
| Enclosure rating: | IP 67 |
| Weight: | 400 g |
| Housing material: | Metal, Zinc diecast |
| Output current Imax.: | 100 mA |
| Supply voltage: | 10 V DC ... 30 V DC 5) |
| Fieldbus interface: | - |
| footnote | 1) May not exceed or fall short of VS tolerances 2) Without load 3) With light/dark ratio 1:1 4) Reference voltage DC 50 V 5) Limit values; operation in short-circuit protected network max. 8 A |
| Shock load: | According to IEC 60068 |
|---|---|
| Ambient operating temperature: | -10 °C ... +55 °C |
| Ambient storage temperature: | -25 °C ... +75 °C |